[代理] 冷凝水补给用混床设备(Tulsion T-42 UPS)

杜笙Tulsion T-42 UPS --------------均粒强酸形阳树脂 , 氢 H+ / 钠 Na+

均粒强酸性阳离子适用于超 纯水的可再生混床系统

MONOSPHERE STRONG CATIONIC ION EXCHANGE RESIN FOR REGENERABLE MB



杜笙Tulsion® T-42 UPS 強酸型阳性離子交换樹脂 ,是一款有較高的交换容量 ,及同时擁有絕佳的物理及化學穏定品貭。可应用於汽电共生发电廠冷凝水处理及混床系統, 去除水中的阳性離子 。

杜笙 Tulsion T-42 UPS 其均勻的颗粒直径, 能取代传统的離子交换樹脂, 並可以减少壓 力损, 可以和 杜笙Tulsion® A-23 UPS 一起搭配使用於2B3T及超纯水可再生的混床。



TYPICAL CHARACTERISTICS – 基本特性



型式(Type):Strong acid Cation exchange resin

主体結構(Matrix structure):Cross 1inked polystyrene

功能基(Functional group):Sulphonic

物理形式(Physical form):Moist spherical beads.

離子型式(Ionic form):Hydrogen (H+)

粒径Particle size ( 英國Mesh):Particle less than 0.3mm max. 1%

均勻係数(Uniformity Coefficient)：1.25 Min

平均粒径(Mean bead Size (mm))：0.58 ( +/- 0.05)

全交换容量(Total Exchange Capacity):1.80 meq/ ml (min.) in H+ form

含水份(Moisture content (approx.)):Approximately 53% in H+form

pH范围(pH range):0 to 14

膨脹係数(Swelling (approximately)):-7% from Na+ to H+ form.

密度(Backwash settled density):800-840 g/l in H+ form；830-870 g/l in Na+ form

允许温度(Maximum temp. stability):120°C in H+ form；140°C in Na+form

溶解率(Solubility):Insoluble in all common solvents.



OPERATION CONDITIONS – 操 作 条 件



***大操作溫度(Operating temperature , max 0 C):120

操作pH范围(Operating pH range ):0 – 14

***小樹脂床高度(Bed depth , mini mm):800

***大(Service flow rate ,Maxi ):120 m3/hr/ m3

逆洗水量(Backwash flow rate):9 to 25 m3/hr/ m3

逆洗浮動空間(Back wash expansion):40 to 75%

再生藥剤(Regenerant ):HCl, H2SO4 for H+ form,

再生藥剂用量(Regeneration levels. ):30 to 120 gms HCl/ lit.；40 to 250 gms H2SO4/ lit.

再生藥剂浓度(Regeneration concentration):3 - 5% HCl, 1.5 to 3% H2SO4

***少通再生藥剂时间(Regeneration Contact time, mini):-20 min.

再生流量(Regeneration flow rate ):5 to 16 m3/hr/ m3

Regeneration slow rinse:2 BV mini.

快洗用水(Fast Rinse ):Service flow rate.

快洗水量(Fast Rinse Volume):2 to 3 BV